| PART |
Description |
Maker |
| AWT6130 |
The AWT6130 provides the additional output power margin RF designers need to overcome additional post-PA insertion loss in tri-mode ...
Cellular Dual Mode AMPS/CDMA 3.5V 29dBm Power Amplifier Module
|
Anadigics Inc
ANADIGICS, Inc
|
| MCP18480 |
The MCP18480 is a –48V Hot Swap Controller with fully configurable features. This Hot Swap Controller have OVLO, UVLO protection features on top of Foldback Current Limiting and Circuit Breaker features. Although ideally suited optic
-48V Hot Swap Controller
|
MICROCHIP[Microchip Technology]
|
| MC68HC908JB8 MC68HC08JB8AJP MC68HC08JB8A MC68HC08J |
This addendum provides additional information
|
FREESCALE[Freescale Semiconductor, Inc]
|
| ST19AF08 |
Smartcard MCU With 4 additional I/0
|
STMICROELECTRONICS[STMicroelectronics]
ST Microelectronics
|
| AT91M40800NBSP |
Attention: additional NWAIT constraints for the AT91M40800
|
Atmel Corp
|
| SM39R16A6 |
Additional Baud Rate Generator for Serial port
|
SyncMOS Technologies,In...
|
| EFM32ZG222F4-QFP48T |
Updated specifications based on the results of additional silicon characterization.
|
Silicon Laboratories
|
| EFM32ZG222F4-QFP48 |
Updated specifications based on the results of additional silicon characterization.
|
Silicon Laboratories
|
| 2706030 |
Lower part of housing, fully assembled, with additional serial contact, open, no. of positions 10 2
|
PHOENIX CONTACT
|
| 2200173 |
Additional labeling of PCB with Phoenix Contact PMB module marker carrier (drill hole diameter 4 mm)
|
PHOENIX CONTACT
|
| REL-IR-4L-24AC |
Plug-in industrial relay with power contacts and additional hard gold plating, 4 PDTs, test button, status LED, mechanical switch setting display, coil voltage: 24 V AC
|
PHOENIX CONTACT
|
